|
|
Brand/Model |
Delta 37-195 |
JET JJ-6CSX |
Powermatic 54A |
Ridgid JPO-600 |
| Bed Length | 45" | 46" | 66" extra long bed | 45" |
| Table Ways | Gibbed Dovetail | Gibbed Dovetail | Gibbed Dovetail | Gibbed Dovetail |
| Fence | ||||
| Size | 4-7/8 x 35-1/4" long | 4" x 29-1/8" | 4" x 38" | 4-1/2" x 29-1/2" |
| Tilt | 2 way tilting | 2 way tilting | 2 way tilting | 1 way tilting |
| Fence Material | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Cutting | ||||
| Capacity Width | 6-1/8" | 6" | 6" | 6-1/8" |
| Cutter Knives | High Speed Steel | High Speed Steel | High Speed Steel | High Speed Steel |
| Number of Knives | 3 | 3 | 3 | 3 |
| Cutter Head Speed | 4800 RPM | 4800 RPM | 4500 RPM | |
| Rabbeting Capacity | 1/2" x 6" | 1/2" x 6" | 1/2" x 6" | 1/2" deep |
| Motor | ||||
| Horsepower | 1 HP | 1 HP | 1 HP | 3/4 HP |
| Power Required | 115/230V, 1Phase | 115/230V, 1Phase | 115/230V, 1Phase | 115/230V, 1Phase |
| Motor ( Type ) Enclosure | GD Guarded open drip proof | TEFC Totally Enclosed Fan Cooled | TEFC Totally Enclosed Fan Cooled | TEFC Totally Enclosed Fan Cooled |
| Features | ||||
| Safety Knife Guards | Front and Rear | Front and Rear | Front and Rear | Front and Rear |
| On/Off Switch | Pushbutton | Pushbutton | Toggle key | Pushbutton |
| Rabbeting | Yes | Yes | Yes | Yes |
| Stand Type | Closed Stand | One Piece Welded Closed Stand | One Piece Welded Closed Stand | 4 piece steel |
| Dust Chute | Yes | Yes | Yes | |
| Infeed Table Adj. | Lever Under Table* | Front Handwheel | Front Handwheel | Under Table Handwheel |
| Outfeed Table Adj. | Yes Under Table | Yes Front Handwheel | Yes Under Table | Under Table Handwheel |
| Warranty Period | 2 Years | Limited Lifetime | 2 Year | ** |
| NET WEIGHT | 225 lbs. | 256 lbs. | 287 lbs. | 208 lbs. |
For more information check out the Ridgid editorial article.
* Note: Delta insist on keeping old fashion lever control on the infeed table. This might be fine for lumber yards, but home shops sometimes need to make very find cuts, just a few thousandths of an inch. The lever can not give you the precise control as dial can. (If you don't believe us, try it for yourself.)
** Covers defects in material and workmanship
We strive to be accurate on all our specifications. If you see any errors, please email us at woodwork@woodworkingtools.com
|